[Wien] fold2Bolch - gfortran

Catalina Coll ccoll at el.ub.edu
Thu Apr 2 16:55:36 CEST 2020


Thanks.

I have tried the tutorial on my workstation.. and I have the same
error message than for my case:

At line 481 of file fold2Bloch.F90 (unit = 11, file = 'Ga8As7Bi1.vector')
Fortran runtime error: End of file

Error termination. Backtrace:

When I compiled fold2Bloch, I obtained a warning, however I did not
expected to be fatal, so I did not mention it:

  dir=1
     1
Warning: Extension: Conversion from INTEGER(4) to LOGICAL(4) at (1)


Catalina Coll

PhD Candidate

LENS - Laboratory of Electron Nanoscopy
MIND - Micro-Nanotechnology and Nanoscopies for electrophotonic Devices
IN2UB - Institute of Nanoscience and Nanotechnology


Departament d'Enginyeria Electrònica i Biomèdica - Universitat de Barcelona



Missatge de Oleg Rubel <rubelo at mcmaster.ca> del dia dc., 1 d’abr. 2020 a
les 16:54:

> Please take a look at this tutorial:
>
> https://github.com/rubel75/fold2Bloch-Wien2k/wiki/Tutorial-2:-Bismuth-in-GaAs
>
> Best regards
> Oleg
>
> On 3/31/2020 5:25 AM, Catalina Coll wrote:
> > Thank you very much. I think that now it is well compiled.
> >
> > However I still have a problem, which seems to come from my supercell.
> > To exectute fold2Bloch is necessary how to unfold the vector, like 2:2:2
> > if the used supercell was obtained by 2x2x2. Is that right?
> > In my case, I had a cubic unit cell at the beging, I tranformed it to a
> > alpha = beta = gamma = 60º using VESTA, this increased the size.
> > Basically, I kept this one, as it was huge. Thus, how can I unfold my
> > vector using fold2Bloch?
> >
> > Thanks in advacance
> >
> > Catalina Coll
> >
> > PhD Candidate
> >
> > LENS - Laboratory of Electron Nanoscopy MIND - Micro-Nanotechnology and
> > Nanoscopies for electrophotonic Devices IN2UB - Institute of Nanoscience
> > and Nanotechnology
> >
> > Departament d'Enginyeria Electrònica i Biomèdica - Universitat de
> > Barcelona c/ Martí i Franquès 1 08028 Barcelona Tel: (+34) 93 403 91 75
> >
> >
> >
> > Missatge de Oleg Rubel <rubelo at mcmaster.ca <mailto:rubelo at mcmaster.ca>>
> > del dia dl., 30 de març 2020 a les 15:29:
> >
> >     I will update it too on GitHub. Are there other obstacles?
> >
> >     Best regards
> >     Oleg
> >
> >     --
> >     Oleg Rubel (PhD, PEng)
> >     Department of Materials Science and Engineering
> >     McMaster University
> >     JHE 359, 1280 Main Street West, Hamilton, Ontario L8S 4L8, Canada
> >     Email: rubelo at mcmaster.ca <mailto:rubelo at mcmaster.ca>
> >     Tel: +1-905-525-9140, ext. 24094
> >     Web: http://olegrubel.mcmaster.ca
> >
> >     On 3/30/2020 7:59 AM, Catalina Coll wrote:
> >      > Thank you very much
> >      >
> >      > Catalina Coll
> >      >
> >      > PhD Candidate
> >      >
> >      > LENS - Laboratory of Electron Nanoscopy MIND -
> >     Micro-Nanotechnology and
> >      > Nanoscopies for electrophotonic Devices IN2UB - Institute of
> >     Nanoscience
> >      > and Nanotechnology
> >      >
> >      > Departament d'Enginyeria Electrònica i Biomèdica - Universitat de
> >      > Barcelona c/ Martí i Franquès 1 08028 Barcelona Tel: (+34) 93 403
> >     91 75
> >      >
> >      >
> >      >
> >      > Missatge de Peter Blaha <pblaha at theochem.tuwien.ac.at
> >     <mailto:pblaha at theochem.tuwien.ac.at>
> >      > <mailto:pblaha at theochem.tuwien.ac.at
> >     <mailto:pblaha at theochem.tuwien.ac.at>>> del dia dl., 30 de març
> 2020 a
> >      > les 13:04:
> >      >
> >      >     Change all  "not(dir)" to ".not.(dir)"
> >      >
> >      >
> >      >
> >      >     Am 30.03.2020 um 11:55 schrieb Catalina Coll:
> >      >      > Thanks for the answer.
> >      >      > I have tried the suggested flags and I get the same error
> >     message.
> >      >      > Here is the error:
> >      >      > fold2Bloch.F90:393:9:
> >      >      >
> >      >      >    if (not(dir)) then
> >      >      >           1
> >      >      > Error: ‘i’ argument of ‘not’ intrinsic at (1) must be
> INTEGER
> >      >      > fold2Bloch.F90:438:9:
> >      >      >
> >      >      >    if (not(dir)) then
> >      >      >           1
> >      >      > Error: ‘i’ argument of ‘not’ intrinsic at (1) must be
> INTEGER
> >      >      > fold2Bloch.F90:447:5:
> >      >      >
> >      >      >    dir=1
> >      >      >       1
> >      >      > Warning: Extension: Conversion from INTEGER(4) to
> >     LOGICAL(4) at (1)
> >      >      > fold2Bloch.F90:463:9:
> >      >      >
> >      >      >    if (not(dir)) then
> >      >      >           1
> >      >      > Error: ‘i’ argument of ‘not’ intrinsic at (1) must be
> INTEGER
> >      >      > fold2Bloch.F90:546:9:
> >      >      >
> >      >      >    if (not(dir)) then
> >      >      >           1
> >      >      > Error: ‘i’ argument of ‘not’ intrinsic at (1) must be
> INTEGER
> >      >      >
> >      >      > Best regards,
> >      >      >
> >      >      > Catalina Coll
> >      >      >
> >      >      > PhD Candidate
> >      >      >
> >      >      > LENS - Laboratory of Electron Nanoscopy MIND -
> >      >     Micro-Nanotechnology and
> >      >      > Nanoscopies for electrophotonic Devices IN2UB - Institute
> of
> >      >     Nanoscience
> >      >      > and Nanotechnology
> >      >      >
> >      >      > Departament d'Enginyeria Electrònica i Biomèdica -
> >     Universitat de
> >      >     Barcelona
> >      >      >
> >      >      >
> >      >      >
> >      >      > Missatge de Pavel Ondračka <pavel.ondracka at email.cz
> >     <mailto:pavel.ondracka at email.cz>
> >      >     <mailto:pavel.ondracka at email.cz <mailto:
> pavel.ondracka at email.cz>>
> >      >      > <mailto:pavel.ondracka at email.cz
> >     <mailto:pavel.ondracka at email.cz>
> >      >     <mailto:pavel.ondracka at email.cz
> >     <mailto:pavel.ondracka at email.cz>>>> del dia dl., 30 de març 2020 a
> >      >     les 11:27:
> >      >      >
> >      >      >     Hi,
> >      >      >
> >      >      >     gfotran should in theory compile anything what ifort
> does
> >      >     (assuming the
> >      >      >     code is a valid standard fortran, which might not be a
> >     case
> >      >     for stuff
> >      >      >     which is only used/tested with ifort). Just set the
> >     compiler to
> >      >      >     gfortran instead of ifort, use the same flags as for
> >     Wien2k
> >      >     ("-ffree-
> >      >      >     form -ffree-line-length-none -O2" might be a good
> >     start) and
> >      >     if you run
> >      >      >     into any issues, provide the specific compile commands
> you
> >      >     use and also
> >      >      >     the errors.
> >      >      >
> >      >      >     Best regards
> >      >      >     Pavel
> >      >      >
> >      >      >     On Mon, 2020-03-30 at 11:00 +0200, Catalina Coll wrote:
> >      >      >      > Dear users and developers,
> >      >      >      >
> >      >      >      > I would like to know if is possible to compile
> >     fold2Bloch with
> >      >      >      > gfortran (I currently have WIEN2k compiled with
> >     gfortran).
> >      >      >      >
> >      >      >      > Thanks in advance.
> >      >      >      >
> >      >      >      > Catalina Coll
> >      >      >      > PhD Candidate
> >      >      >      > LENS - Laboratory of Electron Nanoscopy
> >      >      >      > MIND - Micro-Nanotechnology and Nanoscopies for
> >      >     electrophotonic
> >      >      >      > Devices
> >      >      >      > IN2UB - Institute of Nanoscience and Nanotechnology
> >      >      >      > Departament d'Enginyeria Electrònica i Biomèdica -
> >      >     Universitat de
> >      >      >      > Barcelona
> >      >      >      >
> >      >      >      > _______________________________________________
> >      >      >      > Wien mailing list
> >      >      >      > Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>>
> >      >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>>>
> >      >      >      >
> http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> >      >      >      > SEARCH the MAILING-LIST at:
> >      >      >      >
> >      >      >
> >      >
> >
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >      >      >
> >      >      >     _______________________________________________
> >      >      >     Wien mailing list
> >      >      > Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>>
> >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>>>
> >      >      > http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> >      >      >     SEARCH the MAILING-LIST at:
> >      >      >
> >      >
> >
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >      >      >
> >      >      >
> >      >      > _______________________________________________
> >      >      > Wien mailing list
> >      >      > Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >      >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>>
> >      >      > http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> >      >      > SEARCH the MAILING-LIST at:
> >      >
> >
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >      >      >
> >      >
> >      >     --
> >      >     Peter Blaha
> >      >     Inst.Materials Chemistry
> >      >     TU Vienna
> >      >     Getreidemarkt 9
> >      >     A-1060 Vienna
> >      >     Austria
> >      >     +43-1-5880115671
> >      >     _______________________________________________
> >      >     Wien mailing list
> >      > Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>>
> >      > http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> >      >     SEARCH the MAILING-LIST at:
> >      >
> >
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >      >
> >      >
> >      > _______________________________________________
> >      > Wien mailing list
> >      > Wien at zeus.theochem.tuwien.ac.at
> >     <mailto:Wien at zeus.theochem.tuwien.ac.at>
> >      > http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> >      > SEARCH the MAILING-LIST at:
> >
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >      >
> >     _______________________________________________
> >     Wien mailing list
> >     Wien at zeus.theochem.tuwien.ac.at <mailto:
> Wien at zeus.theochem.tuwien.ac.at>
> >     http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> >     SEARCH the MAILING-LIST at:
> >
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >
> >
> > _______________________________________________
> > Wien mailing list
> > Wien at zeus.theochem.tuwien.ac.at
> > http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> > SEARCH the MAILING-LIST at:
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
> >
> _______________________________________________
> Wien mailing list
> Wien at zeus.theochem.tuwien.ac.at
> http://zeus.theochem.tuwien.ac.at/mailman/listinfo/wien
> SEARCH the MAILING-LIST at:
> http://www.mail-archive.com/wien@zeus.theochem.tuwien.ac.at/index.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://zeus.theochem.tuwien.ac.at/pipermail/wien/attachments/20200402/f3d19f23/attachment.html>


More information about the Wien mailing list