[Wien] Error while running the command ./siteconfig_lapw during installation of WIEN2k code

[Gavin Abo]

I tested siteconfig_lapw on a live USB stick [ 
http://www.democritos.it/pipermail/xcrysden/2017-December/001902.html ].

Does pwd return the location of where WIEN2k was installed?

ubuntu at ubuntu:~$ cd $WIENROOT
ubuntu at ubuntu:~/WIEN2k$ pwd
/home/ubuntu/WIEN2k

Does the WIEN2k_INSTALLDATE file exist?

ubuntu at ubuntu:~/WIEN2k$ ls WIEN2k_INSTALLDATE
WIEN2k_INSTALLDATE

I don't have tcsh installed yet, such that csh with siteconfig_lapw 
seems to be working fine:

ubuntu at ubuntu:~/WIEN2k$ lsb_release -a
No LSB modules are available.
Distributor ID:    Ubuntu
Description:    Ubuntu 16.04.3 LTS
Release:    16.04
Codename:    xenial
ubuntu at ubuntu:~/WIEN2k$ cat WIEN2k_VERSION
WIEN2k_17.1 (Release 30/6/2017)
ubuntu at ubuntu:~/WIEN2k$ tcsh
The program 'tcsh' is currently not installed. You can install it by typing:
sudo apt install tcsh
ubuntu at ubuntu:~/WIEN2k$ sudo apt-cache policy csh
csh:
   Installed: 20110502-2.1ubuntu1
   Candidate: 20110502-2.1ubuntu1
   Version table:
  *** 20110502-2.1ubuntu1 500
         500 http://archive.ubuntu.com/ubuntu xenial/universe amd64 Packages
         100 /var/lib/dpkg/status

ubuntu at ubuntu:~/WIEN2k$ ./siteconfig


***********************************************************************
    *                                WIEN 2k                              *
    *                          site configuration                         *
***********************************************************************

    This is the first time that you install WIEN2k on this computer. Please
    follow the subsequent steps to set up WIEN2k.


ifort: Command not found.
It seems you do not have the intel fortran compiler in your path.
You need a f90 compiler for the installation of WIEN2k and:
a) you have another f90 compiler installed and in your path. Continue ...
b) you have ifort installed, but it is not in your path.
    STOP  and  put two lines like:
    source /path_where_compiler_is_installed/ifortvars.(c)sh intel64|ia32
   (source /path_where_compiler_is_installed/mklvars{em64t|32}.(c)sh) 
for earlier ifort versions
    into your .bashrc | .cshrc startup file.
c) STOP and install ifort+mkl for your platform (or an alternate compiler)

continue or stop (c/s)

On 1/22/2018 9:22 PM, Sourav Dey wrote:
> Dear MrGavin Abo,
>    Thank you for your suggestions. As per your guidelines, I have set the
> LC_NUMERIC=en_US.UTF-8 in the locale settings. If I type locale from
> terminal now, it shows the following.
>
> LANG=en_US.UTF-8
> LANGUAGE=en_US.UTF-8
> LC_CTYPE="en_US.UTF-8"
> LC_NUMERIC=en_US.UTF-8
> LC_TIME="en_US.UTF-8"
> LC_COLLATE="en_US.UTF-8"
> LC_MONETARY="en_US.UTF-8"
> LC_MESSAGES="en_US.UTF-8"
> LC_PAPER="en_US.UTF-8"
> LC_NAME="en_US.UTF-8"
> LC_ADDRESS="en_US.UTF-8"
> LC_TELEPHONE="en_US.UTF-8"
> LC_MEASUREMENT=en_US.UTF-8
> LC_IDENTIFICATION="en_US.UTF-8"
> LC_ALL=
>
> After fixing this issue, I tried to run the command "./siteconfig_lapw"
> from terminal. It still shows the same error.
>
> "If: Expression Syntax".
>
> I typed the command "csh -v siteconfig_lapw" from terminal in WIENROOT
> directory. It shows the following.
>
> unalias rm
>
> set name = $0
> set bin = $name:h
> if ! ( -d $bin ) set bin = .
> cd $bin
> set bin = `pwd`
>
>
> alias define_installdate 'date >$bin/WIEN2k_INSTALLDATE'
> alias wait 'echo "";echo "     Press RETURN to continue";' 'set yn = ($<)'
> alias update_makefiles 'sed -e "s^_FOPT_^$FOPT^" < Makefile.orig |\\
>   sed -e "s^_FOPT_^$FOPT^" |\\
>   sed -e "s^_FPOPT_^$FPOPT^" |\\
>   sed -e "s^_LDFLAGS_^$LDFLAGS^" |\\
>   sed -e "s^_DPARALLEL_^$DPARALLEL^" |\\
>   sed -e "s^_R_LIBS_^$R_LIBS^" |\\
>   sed -e "s^_RP_LIBS_^$RP_LIBS^" |\\
>   sed -e "s^_SCALAPACKROOT_^$SCALAPACKROOT^" |\\
>   sed -e "s^_SCALAPACK_LIBNAME_^$SCALAPACK_LIBNAME^" |\\
>   sed -e "s^_BLACSROOT_^$BLACSROOT^" |\\
>   sed -e "s^_BLACS_LIBNAME_^$BLACS_LIBNAME^" |\\
>   sed -e "s^_MKL_TARGET_ARCH_^$MKL_TARGET_ARCH^" |\\
>   sed -e "s^_LIBXCROOT_^$LIBXCROOT^" |\\
>   sed -e "s^_LIBXC_LIBNAME_^$LIBXC_LIBNAME^" |\\
>   sed -e "s^_LIBXC_FORTRAN_^$LIBXC_FORTRAN^" |\\
>   sed -e "s^_FFTW_VERSION_^$FFTW_VERSION^" |\\
>   sed -e "s^_FFTWROOT_^$FFTWROOT^" |\\
>   sed -e "s^_FFTW_LIB_^$FFTW_LIB^" |\\
>   sed -e "s^_FFTW_LIBNAME_^$FFTW_LIBNAME^" |\\
>   sed -e "s^_ELPAROOT_^$ELPAROOT^" |\\
>   sed -e "s^_ELPA_VERSION_^$ELPA_VERSION^" |\\
>   sed -e "s^_FC_^$f77^" |\\
>   sed -e "s^_MPF_^$MPF^" |\\
>   sed -e "s^_CC_^$c77^"> Makefile'
>
>
>
>
> set FC ; set MPF ; set CC
> set FOPT ; set R_FOPT ; set FPOPT ; set R_FPOPT
> set LDFLAGS ; set R_LDFLAGS
> set DPARALLEL ; set R_DPARALLEL
> set R_LIBS ; set R_R_LIBS ; set RP_LIBS ; set R_RP_LIBS
> if ( ! $?MKLROOT ) set MKLROOT
>
> set FFTWROOT ; set FFTW_LIB ; set FFTW_LIBNAME ; set FFTW_VERSION
>
> set LIBXCROOT ; set LIBXC_FORTRAN ; set LIBXC_LIBNAME
>
> set SCALAPACKROOT ; set SCALAPACK_LIBNAME ; set BLACSROOT ; set BLACS_LIBNAME
> set MKL_TARGET_ARCH
>
> set ELPAROOT ; set ELPA_VERSION
>
> set remote = ssh
> unset mpi
> set MPIRUN
> set R_MPIRUN
> set CORES_PER_NODE = 1
>
>
> set recompile
> unset firstinstall
> unset suggestall
> unset compiled
> set libxcconf = 'false'
>
> set counter = 0
> set nextlist = ( intro system compiler compopts2 parallel dimension
> recompile perl tmp_dir bye )
>
> set name = $name:t
> set logfile = :log
>
>
> set test=`printf "%5.3f \n" 0.15 | grep , |wc`
> if ( $test[1] != 0 ) then
>
> main:
> if ( -e $bin/WIEN2k_INSTALLDATE ) then
> if: Expression Syntax.
>
>
>
> I guess, there is some problem with the last if statement. Kindly help me
> fix this issue.
>
> Best regards,
> -- 
> Sourav Kumar Dey
> Senior Research Fellow
> Applied Nuclear Physics Division
> Saha Institute of Nuclear Physics
> Kolkata-700064
> Tel.:033 2337 1337/1333(lab)
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://zeus.theochem.tuwien.ac.at/pipermail/wien/attachments/20180123/50eea068/attachment.html>